Hey everyone, I’ve been diving into the world of smart home devices lately, and I wanted to share some of my experiences and tips for improving connectivity. I recently faced some challenges with connecting my Z-Wave devices, which were only working when they were practically touching the hub. After some research, I discovered that using a range extender could help, but unfortunately, it didn’t solve the issue entirely. I ended up with the same problem where devices couldn’t connect beyond a certain distance. I also came across a situation where my CCU3 system was turning its LED red at night without any apparent issues. It was a bit concerning, but after some troubleshooting and checking logs, it seems to be a temporary glitch that resolves on its own. I thought I’d share this in case anyone else is experiencing similar behavior. One thing I’m really curious about is finding the best Zigbee 3.0 repeaters to expand my network coverage. I’ve heard great things about Salus repeaters and Ikea Tradfri, but I’m not sure which would be the most reliable for my setup. If anyone has experience with these or other repeaters, I’d love to hear your recommendations! In the meantime, I’ve been experimenting with different placement strategies for my existing devices to optimize signal strength. It’s been a bit of trial and error, but I’m slowly getting the hang of it. If anyone has tips for troubleshooting connectivity issues or suggestions for reliable repeaters, please share! I’m always looking for ways to improve my smart home setup and would appreciate any advice you can offer. Let’s keep the conversation going and help each other out!