Hey everyone, I wanted to share my experience with setting up motion detection on my EZVIZ EZ Cube Pro. Initially, I was a bit frustrated because I could only view the live feed in my Lovelace card and couldn’t interact with the device beyond that. After some research and trial and error, I managed to get motion detection and other functionalities working smoothly. Here’s how I did it:
-
Configuration Setup: I started by ensuring my camera was correctly configured in the
configuration.yamlfile. Using the ffmpeg platform was a good start, but I realized I needed to integrate it with Home Assistant services for more control. -
Motion Detection Services: I discovered that enabling motion detection through the Home Assistant services was the key. Under the ‘Services’ section in the Developer Tools, I found the right commands to toggle motion detection on and off. This allowed me to create custom automations based on motion events.
-
Snapshot and Sleep Mode: To take snapshots, I utilized the built-in camera services in Home Assistant. For sleep mode, I set up a routine that activates during specific times, reducing unnecessary alerts while still monitoring for significant movements.
-
Integration with Lovelace: I updated my Lovelace dashboard to include buttons for toggling motion detection and taking snapshots. This made controlling the camera much more user-friendly.
-
Troubleshooting Tips: If you’re having trouble with motion detection, ensure your camera’s firmware is up to date. Also, check the camera’s placement to avoid false triggers from light changes or pets.
By following these steps, I was able to fully integrate my EZVIZ camera into my smart home setup. It’s now an essential part of my security system, providing peace of mind with its reliable motion detection and easy-to-use features. If anyone has further questions or needs help setting up their EZVIZ devices, feel free to ask!