Greetings, fellow smart home enthusiasts! I’m currently exploring ways to enhance my home security system by integrating my Fibaro Smart Implant with my existing AlphaVision NG alarm system. The goal here is to create a seamless connection where my Homey can detect when the alarm is triggered, and ideally, allow me to arm or disarm it through the implant. This would add an extra layer of convenience and security to my setup.
After some research, I came across the manual for the AlphaVision NG system, specifically page 20, which details the mainboard and potential connection points. My initial thought is that the AL1/AL2 contacts might be the key here. I’m curious if anyone has successfully connected a Fibaro Smart Implant to a similar alarm system and how they configured it within Homey.
I’d greatly appreciate any advice or step-by-step guidance on how to establish this connection. Whether it’s about wiring, setting up the correct configurations in Homey, or troubleshooting common issues, your insights would be invaluable. Let’s collaborate to make this integration a reality! Thanks in advance for your help. 