As I continue to explore and enhance my smart home setup, I wanted to share my journey in optimizing my energy monitoring system. I’ve been using a combination of ESP32 devices, solar panels, and grid monitoring tools to track my energy consumption and production. However, I recently encountered a challenge with syncing data from my solar panels with the grid readings—a lag of about 10-20 seconds that was throwing off my calculations.After some research, I discovered that implementing a low-pass filter helped smooth out the fluctuations, but it wasn’t a perfect solution. I then wondered if there was a way to delay one of the sensors to better align the data. While I haven’t found a direct filter solution yet, I’ve been experimenting with time-shift adjustments in my automation rules to compensate for the lag.One exciting development I’d like to share is integrating my Govee smart lights into this system. By setting up custom scenes and routines, I’ve been able to create a more energy-efficient home environment. For instance, during off-peak hours, my lights automatically adjust to use less energy, and I’ve even integrated motion sensors to ensure lights are only on when needed.I’d love to hear from others who might have tackled similar challenges or have tips on further optimizing energy monitoring. It’s been a rewarding experience learning how to balance technology and sustainability in my home, and I’m eager to continue improving my setup!