Hi everyone, I wanted to share my experience with setting up Qubino flush dimmer units for both dimming and scene triggering. After some trial and error, I managed to configure the I2 input to work as a motion sensor by setting parameter 100 to 9. However, I encountered an issue where the I2 input wouldn’t trigger a scene to turn on a light connected to a NodOn plug. If anyone has successfully used Qubino’s I2 or I3 inputs for scene triggering, I’d love to hear your tips or tricks!
For those looking to integrate multiple brands or devices, I’ve found that taking the time to thoroughly test each input and ensure proper configuration is key. It’s also worth exploring community forums or support resources for additional troubleshooting steps. Happy automating! 