I’ve been diving into the world of Zigbee with my RaspBee 2, and I must say, it’s been an exciting journey. However, I’ve hit a bit of a snag with updating the firmware. Let me walk you through my experience and see if anyone out there might have some wisdom to share.So, here’s the deal: I’ve been trying to update my RaspBee 2 firmware using GCFFlasher. I followed the manual update guide to a tee, both on a regular Raspberry Pi image and the pre-made one with deCONZ installed. But every time I try, it just retries and fails. It’s like the firmware update is stuck in a loop!At first, I thought maybe it was a simple compatibility issue. I checked the logs, and it seems like my device is being recognized as a RaspBee instead of a RaspBee 2. That’s a bit confusing because I know I have the newer model. Could it be a software glitch, or maybe there’s something I’m missing in the configuration?I’ve retried the process multiple times, even going as far as rebooting the system and double-checking all the connections. But no luck so far. The error messages are pretty generic, so it’s hard to pinpoint exactly what’s going wrong. It’s frustrating, but I’m determined to crack this.Now, I’m considering whether a factory reset might help. I’ve heard that sometimes devices need a clean slate to accept new firmware. On the other hand, I don’t want to lose any existing configurations or data. It’s a bit of a catch-22.If anyone out there has faced a similar issue, I’d love to hear how you tackled it. Maybe there’s a workaround or a specific step I missed in the process. I’m all ears for any troubleshooting tips or insights!In the meantime, I’ll keep plugging away. I’ve got a spare Pi3b ready to go if I need to set up a new environment. It’s a bit of a hassle, but I’m committed to getting this sorted. After all, automation is mission-critical around here now!Thanks in advance for any help or advice you can offer. Let’s see if we can get this firmware update back on track!