I wanted to share my recent experience with resolving lagging issues in my Z-Wave setup. After encountering delays with my Lutron Caseta and ELK security system, I was determined to find a solution without resorting to frequent reboots.Initially, I noticed that commands to my Z-Wave devices were delayed by 30-45 seconds. This was frustrating, especially with my smart lighting system. I tried troubleshooting by checking my network connection and ensuring all firmware was up to date, but the issue persisted.After some research, I discovered that the problem might be related to device configuration and network optimization. I decided to perform a thorough Z-Wave network repair, which involved re-interviewing all devices and optimizing their positions on the network. This process was time-consuming, but the results were worth it.To my delight, the lagging issue significantly improved. My devices now respond much faster, and the overall system performance has been much more reliable. I’ve even noticed that my daily routines run smoother now.If anyone else is experiencing similar issues, I recommend checking your Z-Wave network settings and considering a network repair. It’s a bit of work, but it can make a world of difference in your smart home experience.Happy automating! 