Hey everyone, I wanted to share my recent experience with my Wyze Cam V3 and how I resolved a frustrating issue with video playback. I hope this helps others who might be facing similar problems.A few weeks ago, I noticed that my Wyze Cam V3 was recording to the SD card as usual, but when I tried to view the footage, I kept getting the message ‘No video at the selected time.’ This was really frustrating because I rely on my cameras for security and peace of mind. I tried everything from reformating the SD card to restarting the camera, but nothing worked. After some research, I discovered that the firmware on my camera was outdated. I decided to update it to the latest version, which involved a bit of a manual process since the camera wasn’t recognizing the SD card properly. Once the firmware was updated, the issue seemed to resolve itself. The camera started recording again, and I could finally view the footage without any problems.Here are a few tips I learned during this process:- Always check for firmware updates before troubleshooting hardware issues.- Make sure your SD card is properly formatted and compatible with your camera.- If you’re still having issues, try resetting the camera to factory settings and reconfiguring it.It’s been a week since the update, and my camera has been working perfectly. I’m so relieved to have this issue behind me! If anyone else is struggling with similar problems, I hope my experience helps you find a solution.Happy automating everyone! 