Hey everyone! I wanted to share my experience in setting up multiple cameras from different manufacturers using FFmpeg. It was a bit challenging at first, but I managed to get everything working smoothly. Here’s what I learned and how I did it.First, I realized that each camera might require slightly different FFmpeg settings. For my Riolink camera, I had to tweak the stream parameters to ensure it worked seamlessly. I started by testing different configurations and logging the results to identify what worked best.One thing I discovered was the importance of specifying camera-specific settings. Instead of using a one-size-fits-all approach, I created separate configurations for each camera model. This involved adjusting parameters like video codecs, resolutions, and bitrates to match each device’s capabilities.I also found that organizing the settings in a structured manner made the process much easier. By categorizing cameras based on their manufacturers, I could apply pre-defined configurations more efficiently. This not only saved time but also reduced the chances of errors.Another key takeaway was the value of community support. When I encountered issues, reaching out to forums and groups provided invaluable insights. I learned that many others had faced similar challenges and were willing to share their solutions.Finally, I implemented a system to monitor and adjust settings dynamically. This allowed me to adapt to any changes in camera performance or network conditions without manual intervention. It’s been a great way to ensure consistent functionality across all devices.Overall, configuring multiple cameras with FFmpeg was a rewarding experience. It taught me the importance of detailed testing, organized planning, and leveraging community resources. I hope my journey can inspire others facing similar challenges and provide a helpful roadmap for their setups.If anyone has questions or needs further clarification, feel free to ask! I’m happy to share more details or troubleshoot specific issues.