Hi everyone, I wanted to share my experience with pairing Ikea Parasoll and Vallhorn devices using a Sonoff CC2652P Zigbee dongle via ZHA. Initially, I faced some challenges, but after some troubleshooting, I managed to get everything working smoothly. Here’s my journey:I started by updating the dongle firmware from 2021.10 to 2024.07, hoping that the newer version would resolve any compatibility issues. However, the progress still didn’t move beyond the configuration phase. I tried resetting the devices and ensuring they were in pairing mode, but nothing seemed to work.After some research, I discovered that sometimes the device IDs can cause conflicts. I decided to reset the Zigbee network and start fresh. This involved removing all devices from the network and reinitializing the dongle. Once the network was reset, I attempted to pair the devices again, and this time, they connected without any issues.Here are some key takeaways from my experience:1. Firmware Updates: Always ensure your dongle firmware is up to date, as newer versions often include bug fixes and improved compatibility.2. Network Reset: If devices aren’t pairing, consider resetting your Zigbee network. This can resolve conflicts and start fresh.3. Pairing Process: Make sure devices are in pairing mode and within range of the coordinator. Sometimes, moving the devices closer can help.I hope this helps anyone else experiencing similar issues. Happy pairing! 