I recently encountered an interesting issue with my Hue bulbs that I wanted to share and discuss. After setting up a daily event to turn my bulbs on at sunset and off at sunrise, I noticed that one of the bulbs would occasionally turn back on after the scheduled off event. This was puzzling because the event history didn’t show any commands being sent to the bulb, and it wasn’t always the same bulb that would reactivate.\After some research and troubleshooting, I discovered that the issue might be related to how the bulbs handle their internal state or possibly interference from other devices on my network. I decided to dig deeper into the logs and settings to see if I could find any patterns or clues.\One approach I took was to use the Event Monitor in the SmartThings app to track any unexpected commands or state changes. This helped me identify that the bulb was receiving an ‘ON’ command from somewhere, but I couldn’t pinpoint the source. I also explored adjusting the timing of the events and testing different bulbs to see if the issue was consistent.\After some trial and error, I found that resetting the bulb’s settings and ensuring that all firmware updates were applied seemed to resolve the issue. Additionally, I set up a rule in the Rule Machine to monitor and override any unexpected commands, providing an extra layer of control.\This experience taught me the importance of thorough logging and testing when troubleshooting smart home setups. It also highlighted the value of community forums and resources in identifying and resolving issues. I’m relieved to have this working smoothly now, and I hope this post can help others who might encounter similar problems. Happy automating! 