Hey everyone, I just wanted to share my experience with updating Zigbee2MQTT to version 2.0.0. I’ve been using it with my Sonoff USB adapter for quite some time now, and it was working perfectly. However, after the update, I encountered some issues that left me a bit puzzled.
Initially, I noticed that my devices weren’t connecting as they used to. I started digging into the logs and realized that the problem was related to the EZSP layer failing to start. I tried adjusting the baud rates and even重新配置了我的设置，但问题依旧存在。
经过一番研究，我发现需要在配置文件中添加adapter部分。我按照教程进行了修改，但仍然没有解决问题。日志显示EZSP层启动失败，这让我有点困惑。
最终，我决定重新安装Zigbee2MQTT，并确保所有依赖项都是最新的。此外，我还检查了我的USB适配器是否正确识别，并重新连接了设备。经过这些步骤后，问题终于解决了，我的设备再次正常工作。
这次经历让我意识到，及时更新固件和依赖项是多么重要。希望我的分享能帮助那些遇到类似问题的用户。如果有人也有类似的问题，欢迎在评论区交流，我们一起解决问题！