I have a Zooz Zen06 switch that was working in another room of the house, further away from the hub. I’ve moved it closer to the hub, albeit behind an entertainment center, to control some accent lights in the entertainment unit. It’s registering power consumption okay, but I can’t control it to turn it on and off. I’ve attempted to run several Z-Wave repairs, and each time in the logs I see the following:
It attempts ‘Repair setting SUC Route’ a few more times and then finishes the repair. I never see anything else for this device. Any idea what’s going on here and why it won’t turn on and off? I let it sit a few days already, thinking it just needed to take some time to repair. The funny part is I have an Aeotec range extender less than 3 feet from it that I added for my Schlage locks on my door to help with my mesh, and that doesn’t seem to help this device either. Do I need to just switch to a different switch? I was thinking of replacing it with an in-wall Enerwave dual outlet… but don’t want to spend $40 just to have the same issue with that device. I have an Aeotec Z-Wave Plus multisensor in a bathroom directly on the other side of the wall in the ceiling that’s working just fine as well. Thoughts?