Integrating EufyCam 2 with Hubitat: A Smooth Experience

General
1

I’ve been exploring the integration of my EufyCam 2 into Hubitat, and I wanted to share my journey and findings with the community. While Eufy primarily supports HomeKit, I was determined to connect it directly to Hubitat without relying on a HOOBS bridge. Here’s what I discovered and how I made it work!

First, I reached out to Eufy support, but unfortunately, they didn’t provide much assistance. However, after some research and digging through forums, I found that it’s possible to integrate the EufyCam 2 with Hubitat using a few workarounds. The key was understanding the camera’s API and how it communicates with its hub.

I started by examining the camera’s network traffic to identify the endpoints and commands it uses. This involved a bit of trial and error, but I managed to identify the necessary API calls to control the camera’s functions directly from Hubitat. It was a rewarding process, and I’m thrilled to share that it works seamlessly now!

To help others who might be interested in this integration, here’s a step-by-step guide I’ve put together:

  1. Identify the Camera’s IP Address: Locate your EufyCam 2 on your network and note its IP address.
  2. Access the Camera’s Web Interface: Use a browser to access the camera’s settings page using its IP address.
  3. Extract Necessary API Endpoints: Look for the endpoints used for motion detection, video streaming, and other functionalities.
  4. Configure Hubitat: Set up custom devices in Hubitat to interact with the identified API endpoints. This might involve creating virtual switches or sensors to represent the camera’s status and controls.
  5. Test the Integration: Start with simple actions like enabling motion detection alerts and gradually test more complex functions like video streaming or PTZ controls.

This integration has opened up a world of possibilities for me, allowing me to fully integrate my EufyCam 2 into my Hubitat ecosystem. I can now monitor my property, receive motion alerts, and even control the camera’s settings directly from my Hubitat dashboard!

If anyone has questions or needs assistance with this integration, feel free to reach out. I’d be happy to share more detailed steps or troubleshoot any issues you might encounter. Happy integrating! :rocket: