Hi everyone, I’ve been diving into the world of Home Assistant and Alexa integration, and I thought I’d share some of my experiences and tips in case they can help others. 
First off, I recently migrated from HASSbian to Home Assistant on Ubuntu Server. It was a bit of a learning curve, especially figuring out how to migrate all my add-ons. I found that copying the configuration files was straightforward, but the add-ons and their configurations were a bit trickier. I ended up reinstalling them one by one, which worked out in the end. If anyone has a smoother method, I’d love to hear it! 
On the Alexa front, I hit a snag with the 150-device limit. I have around 180 devices connected via Hubitat, and Alexa just stopped discovering new ones. It was a bit frustrating, but after some research, I realized it’s a known limitation. I ended up creating smaller groups in Hubitat to bypass this. If anyone has a better workaround, please share! 
Another thing I’ve been experimenting with is setting up a stream component on my Mac. It took a few attempts to get everything installed correctly, but now it’s running smoothly. The only hiccup is when I start a stream, it sometimes causes Home Assistant to terminate. I’m still troubleshooting that, but any advice would be appreciated! 
Lastly, I wanted to mention the importance of battery management. I recently had an issue where a Kwikset 914 lock’s battery level dropped unexpectedly. Replacing the batteries didn’t resolve the issue immediately, but after a factory reset, it started reporting correctly. It’s a good reminder to keep an eye on battery levels, especially in devices that are critical for security. 
I’d love to hear about everyone’s experiences and tips, whether it’s about migrations, integrations, or troubleshooting. Let’s keep the community knowledge flowing! 