Hey everyone, I’ve been diving deep into optimizing my Home Assistant setup and wanted to share some of my experiences and tips. First off, I recently upgraded my hardware from a Raspberry Pi 3 to an Intel NUC, and the performance boost has been incredible! Simple tasks like restarting Home Assistant or deploying Node-Red flows now take just a few seconds instead of minutes. It’s a game-changer for my workflow. However, I noticed that over time, the system started to slow down again. After some troubleshooting, I found that deleting the home-assistant_v2.db file and rebooting the system restored the speed. I’m curious if others have experienced similar performance degradation and how they’ve handled it.
Another area I’ve been focusing on is device tracking. I use Tile trackers and my smartphone for location services, but recently, the tracking has become unreliable. The Tile devices still show up on the map, but they’re not updating their positions, and my smartphone isn’t being tracked at all. I’ve tried clearing the cache, re-enabling sensors, and ensuring location services are properly set up, but nothing seems to fix the issue. If anyone has encountered this before or has suggestions, I’d love to hear them!
On the topic of cameras, I’ve been struggling with getting live streams to work in HomeKit. The thumbnails load fine, but when I try to view the stream, I get an error saying the camera has no stream source. I’ve checked the logs and everything seems to be correctly configured on the Home Assistant side. I’m wondering if there’s a way to test the stream URL directly using something like VLC to see if the issue lies with the stream itself or the integration with HomeKit. Any advice would be greatly appreciated.
Lastly, I’ve been working on integrating my solar setup with ModBus registers. I have two MPPT strings, and I want to sum their values to get the total solar generation. I’m considering using rules or transformations to achieve this, but I’m not entirely sure which approach is the most efficient. If anyone has experience with ModBus integrations or can offer some best practices, I’d be really thankful.
It’s amazing how the community comes together to solve these challenges. I’m looking forward to hearing your thoughts and experiences!