I’ve recently encountered some peculiar behavior with my Ikea PRAKTLYSING curtains, and I’m reaching out to the community for advice. Whenever the sun sets and triggers the curtain to close, it starts moving but then stops immediately. This happens both with the close and open commands, and sometimes the curtain doesn’t react at all. What’s even more puzzling is that the curtain continued to close even after I removed the battery—it was quite a surprise! I’ve tried troubleshooting by checking the battery connections, ensuring the curtain is properly aligned, and even resetting the device. Despite these efforts, the issue persists. I’m wondering if others have experienced similar problems and if there’s a solution I’m missing. From what I’ve gathered, it might be related to duplicate commands being sent, which could be causing the curtain to stop mid-action. I’m also curious if there’s a way to adjust the automation settings to prevent this from happening. Any tips or insights would be greatly appreciated! Thanks to everyone for your help and suggestions. Let’s hope we can figure this out together! 