I recently integrated some Legrand switches (model 067723) into my Home Assistant setup, but I’ve run into an issue where the devices only show battery status. While the on/off buttons work and the system detects the button presses, it seems like the device isn’t being mapped correctly. I’ve tried using both the zha/zigate integrations and a combee 2, but the problem persists.
Looking at the logs, I see that the device is sending cluster commands 0 and 1, but there’s no handler for these commands. This suggests that the device might not be fully supported or configured correctly in my setup.
I’ve reached out to the community for help and have started troubleshooting by checking the device bindings and ensuring the firmware is up to date. If anyone has experience with Legrand switches or knows of any workarounds, I’d greatly appreciate the advice! Let’s figure this out together. 