Hey everyone, I wanted to share my experience with the Wyze Cam Outdoor and its pairing process. I recently faced a challenge where my camera couldn’t pair with the base station, even though both were connected to the same network and had the latest firmware updates. After some research and troubleshooting, I found that the issue might be related to the firewall settings on my Cradlepoint IBR600c router. The router’s firewall, while open for outbound traffic, might have been blocking some necessary ports for the Wyze system to communicate effectively.
To resolve this, I adjusted the firewall settings to ensure that all required ports for Wyze operations were open. This involved contacting Wyze support for specific port requirements and configuring the router accordingly. After making these changes, the camera successfully paired with the base station!
I wanted to document this experience because I know others might be facing similar issues, especially if they’re using cellular routers or custom network setups. It’s important to check both hardware and software configurations when dealing with connectivity problems. If anyone else is struggling with pairing their Wyze Cam Outdoor, feel free to reach out—I’d be happy to help troubleshoot or share more detailed steps!
Happy smart home tinkering! 