Discover How the Multi-State Sensor P100 Is Used by the Forum

Aqara Products
,
1

:loudspeaker: Update on Mar 13th:

Thank you to everyone who joined in! We’ve absolutely loved reading your incredible reviews lately and seeing how much you enjoyed testing the product.

This event has officially ended. All reward points have now been issued to your accounts, be sure to check them out. Thanks again for your enthusiasm, and stay tuned for more events coming soon! :sparkles:

Hello Forum!

Recently, we ran a trial program for the P100, and most of our testers are going to receive the device soon. If you’re one of the lucky testers, we’d love to see how you’re using it in your own setup and scenarios.

Share your real-world use cases, creative ideas, and hands-on experiences. Your insights will not only help other users see what the P100 can do, but also help our team better understand your expectations and improve the product going forward.

Shipping Update for Testers

Tracking numbers for the US have been sent to your email addresses. For participants in other countries, tracking info will be rolled out in stages. Thank you for your patience!

How to participate

  • Create a New Topic in the forum. (Outstanding posts will be featured!)
  • Share your usage scenarios and experience with the Multi-State Sensor P100. We highly encourage video submissions! The best ones will be shared across our official social media channels.
  • Add the tag Multi-State-Sensor-P100 to your post.

Rewards

  • :gift: 50 points for every valid submission
  • :star2: Outstanding posts will receive extra 200 points (Video posts are more likely to win!)

We will collect the use cases for one month and rewards will be granted weekly.

Before You Get Started

For a smoother hands-on experience, please note the following:

1. Prepare Your App & Hub
Update to the latest versions before adding devices:
:white_check_mark: Aqara Home App: V6.1.1 or above
:white_check_mark: Aqara Hub Firmware: v4.5.30 or above
Note: Zigbee connection is currently limited to Hub M3 and M200. Support for other hubs is coming in early March.

2. Upgrade Sensor Firmware
Once connected, update your sensor to the latest firmware:
:arrow_up: Matter: v1.0.0.2
:arrow_up: Zigbee: v0.0.0_0021

Thank you for your patience!

A Message from the Product Team

We want to be fully transparent: the P100 you have is a pre-release version, not the final retail product. You are among the first to test it, and your feedback is the foundation of our next update.

If you encounter any bugs or have suggestions for improvement, you can communicate directly with our Product Manager here. :point_down:

We are listening closely—whether your feedback is positive or negative—and will prioritize our optimizations based on your input.

Thank you for joining us at this early stage. Let’s refine the P100 into something amazing together!

Multi-State Sensor P100
Multi-State Sensor P1001920×1005 93 KB

80 Likes
8

Once I synched the device in the Apple Home ecosystem, this is how the P100 shows up. It seems that it is not properly setup.

I did set it up as vibration.

My intent is that it will trigger a dedicated button when my dog needs to go outside.
Our dog knows when he needs to go he pushes the large button. We don’t have a doggie door as there are some concerns with going that route.

IMG_1889
IMG_18891320×2682 204 KB

34 Likes
9

Hi Ming Wen.

I haven’t heard anything from you since I signed up for the list of those who wanted to test it.

And don’t you need any info on me to send it to Denmark? Address etc.

Regards David, Denmark.

14 Likes
10

If you haven’t heard or gotten your discount code it’s because you were not one of the lucky once for testing. Mine is on the way and can’t wait to put it to the test. :muscle:t2: but I’m sure they will be released for sales before too long for everyone.

18 Likes
11

My precious and love to see what can I achieve

IMG_1398
IMG_13983024×4032 1.64 MB

30 Likes
12

Did you choose Zigbee or Thread?

Ohhhh… the leap of faith which one will it be.

17 Likes
13

Just got mine in! Unfortunately I probably wont get the chance to test it out til early next week :upside_down_face: Looking forward to trying it though!

18 Likes
14

Zigbee since I have Hub M3

16 Likes
15

I started out in Zigbee, went over all the different features/options but ended up switching back to Thread.

For the moment I’m staying in Thread mode while I test it out for a few days.

There are too many use case options at the moment I’m going to have to put some thought into this one.

16 Likes
16

I am using Zigbee because I have home assistant setup. With zigbee2mqtt it works like charm. Just pair it to Aqara hub m3 and rest it will be automatically taken care.

17 Likes
17

Going for Zigbee with my M3 hubs for sure.

11 Likes
18

IMG_5718
IMG_57182268×4032 2.37 MB

IMG_5721
IMG_57212268×4032 1.53 MB

Super. Thank you :+1:

19 Likes
19

I installed it on the garage door and set up notifications for opening and closing, but I hope to come up with something else in the future.

12 Likes
20

You might like this garage door option. Aqara Door and Window Sensor garage door bracket

13 Likes
21

Super excited to see the results of this. So many possibilities. I love reading how the users set them up, gives me great ideas.

9 Likes
22

finally :heart_eyes:

IMG_3894
IMG_38941920×3413 130 KB

15 Likes
23

Have fun reading:

or

9 Likes
25

3D printed - Garage Door sensor

8 Likes