Boost Your Points! Aqara Automation Allstars Campaign

[AqaraOfficial]

Hello Everyone,

We’re absolutely thrilled by the overwhelming response to the FP300 Presence Multi-Sensor Exclusive Trial! A huge thank you to our passionate community, and a warm welcome to all the new members! We know many of you are eager to join FP300 trial but, due to higher than expected demand, we will need to enforce the the 50-point Aqara Forum threshold. To help you get there faster, we’re launching an exclusive Point Boost Bonanza!

Show Us Your Aqara Home Set Up!

Share how you used Aqara products to solve a real-life pain point or create fun/convenient automations. Whether it’s a sunrise alarm routine or a cozy movie night scene, we want to see it!

How to Participate

1. Post in [Automation Inspirations]: Explain your automation setup. Don’t forget to use tag AqaraAutomationAllstars. Photos and videos are welcome!
2. Comment Below: Drop your post link in THIS thread’s comments so we can track it!

Rewards

DAILY GIVEAWAY: We’ll randomly pick 1-2 participants from the comments each day for 20 instant Boost Points! (Weekend winners will be selected on the following Monday.)

Event Time

Ends August 20, EST

Ready to Boost Your Points?

Go to Automation Inspirations & Post Now

Drop your post link BELOW to enter!

Let’s share your amazing automation setup and inspire others! Good luck!

[AqaraSting13]

The best way to Earn Points and join FP300 exclusive trial!

[vanncookjr]

Welcome to Automation Inspirations - Your Smart Home Creation Hub

Leak sensors are wonderful, however they can only sense a leak and report the leak. That’s great if you are at home or close to home. When Aqara introduced the water valve it took my home from being smart to being genius. When a water leak is sensed in my home not only do I get a notification my home is proactively able to turn off my water main. I have installed sensors in my bathrooms,kitchen,laundry and next to my water heater. Now if I am on vacation or far from home my leak sensors work wit…

[manucnt]

A Big Thank You for the Aqara Water Leak Sensors!

Hello everyone, I wanted to share my positive experience with the Aqara Water Leak Sensors. Last year, just a few days after renovating my house, I discovered a leak under a bathroom sink that ruined the brand-new cabinet. It was incredibly frustrating to have to replace it immediately. That incident motivated me to search for smart leak detectors. I decided on the Aqara sensors because they were: Affordable Completely wireless (no sockets needed) Small enough to fit in tight spaces I boug…

[tempmw]

Here’s the link to my setup:

FP2 as a non-visual monitor for indoor swimming pool

[jitzwellym]

Perfect.

[aqara131]

My office setup

My office door has an Aqara U200 lock and a Door and Window P2, in the ceiling lights I have 2 LED Bulb T2s. All the devices are connected to the Aqara app and to Home Assistant via Matter. I’ve got a few automation running When the U200 locks after 8pm the lights turn off, a wall heater connected in HA also switches off At 10pm if the door is closed and the U200 is unlocked I get a notification to remember to lock the door before bed If the U200 is unlocked after sunset the bulbs turn on

[g_b_icecream]

Child Night Light - Presence Sensor FP2

I just wanted share one use of my presence sensor. I have it set up in the hallway that connects to all the Upstairs bedrooms. I have a light in the bathroom (single light just above the toilet), that also connects to the same hallway. Since I have small kids, I setup the presence senor to turn the bathroom light on for 2 minutes when they step into the hallway. So in the middle of the night there is no need to worry about turning on and off lights. They can come and go almost in their sl…

[home_asst_user]

I have the Motion and Light Sensor P2 hooked into my Home Assistant. We have a small entryway between the garage and the rest of the house that gets no natural light. When the P2 senses motion in that entryway, it turns on the light for five minutes to aid those entering to come in without tripping on things left inadvertently in the way, or for those exiting to see the key box and grab what they need on the way out.

No need to mess with the switch at all!

[faulsjos10]

I use the temperature & humidity sensors to track our chest & upright freezers. We have two little kids who have gone into the freezer for popsicles and left the door open only to lose $$$ in thawed goods. These sensors have given us alarms if those doors are left open too long and saved us a ton of money and peace of mind on our frozen goods!

[devin]

Thanks. This is useful.

[jm_collin_78]

@AqaraOfficial

Automation Inspirations

Hello !

Here is my Aqara setup (21 devices !): My home setup - 21 Aqara devices

Have a nice day.

[Dared777]

Nice!

[ciclope_leda]

@AqaraOfficial

AqaraAutomationAllstars

AqaraAutomationAllstars
I have an automation with an aqara button. Automation consists of the fact that if you pulse once the door opens thanks to the U200 lock. If you press twice, open the door also thanks to the U200 lock, closes the playback of the homepods speakers, wait 15" and then sets the aqara M2 and M3 alarm.

[Doeppi]

This is great, getting so much inspiration out of this

[edshaper]

Welcome to Automation Inspirations - Your Smart Home Creation Hub

Hi. I use a lot of Aqara devices in my house, all binded in HomeAssistant and then in HomeKit (except for the cameras, that are not compliant with HomeAssistant). The two cameras (G2H and G3) are wonderful in HomeKit as they turn on/off, record on/off automatically when the first/last person arrives/leaves home and the alarm is armed ! Full auto, never forget to arm/disarm the alarm and record events !!! Perfect !

[AqaraOfficial]

Winners Announcement 1

Thank you all for sharing! Congratulations to winners today! @manucnt @aqara131 Reward points issued.

More winners will be selected in the coming days. Good luck!

[Boltikarie]

@AqaraOfficial Here’s a true story about how I’m using Aqara products and automations.
My investment has paid for itself, and then some more! =)

My Aqara setup on my rental

In 2007, I bought a 1980 flat in the city center in with the intention of renting it out. 3 rooms, shared areas and WC. Old brick and think walls, 3.7 m high ceilings and 2.5 high windows. When the energy crisis hit Europe in 2022-2023, electricity and gas prices increased considerably, about 300%. From approx. 1.5 czk to approx. 6 czk, depending on the region and consumption levels. The government had to intervene and set a max price for gas and electricity. To avoid overpaying on gas to heat…